New Member Senior At Tech...need help!

New Members Post Up and Introduce Yourselves

Moderator: Club Officers

Post Reply
VT_Kook
Posts: 7
Joined: Mon Dec 05, 2016 3:21 pm

New Member Senior At Tech...need help!

Post by VT_Kook » Tue Dec 06, 2016 10:26 am

Hey guys, I am a senior at VT, and was just introduced to this club through the 4runner forum! Pretty bummed I didn't know about it before. That being said, I am pretty pumped about next semester now. If anyone has time to help later next week up here or if you live near Midlothian/Powhatan VA and are going home for break, I have a Tundra TRD/906 OME and Bilstein lift im trying to put on my 4runner. Usually do everything myself, but I haven't messed with suspension before, and it looks like some of you are pretty familiar. Thanks!

User avatar
WhiteRhino
Vice President
Posts: 163
Joined: Thu Sep 04, 2014 12:35 am

Re: New Member Senior At Tech...need help!

Post by WhiteRhino » Tue Dec 06, 2016 11:09 am

Welcome, another yota in the club is awesome, i know a lot of people will have finals next week but hopefully someone is free to help ya
1999 Tacoma, 3 inch bilstein/eibach lift, 35s, locked front and rear
--VBYOTA--

To punish and enslave….. :thumby:

User avatar
hoveyg
Posts: 40
Joined: Mon Aug 29, 2016 10:58 am

Re: New Member Senior At Tech...need help!

Post by hoveyg » Tue Dec 06, 2016 12:33 pm

Welcome to the club! I should have some time next week after tuesday. I'm a jeep guy so i dont have much experience with yota's but id be glad to help wrench.

User avatar
BadAssEddie
Posts: 2635
Joined: Sun Sep 27, 2009 11:12 pm
Location: The Woods

Re: New Member Senior At Tech...need help!

Post by BadAssEddie » Tue Dec 06, 2016 4:58 pm

Several guys have put lifts on in the parking garage on a weekend night. Im sure several of us would come lend a hand if you planned it out.
1969 Cadillac Deville 7.7 Big Block
1978 Ford F-150 6.4 FE
1993 Ford Bronco 5.8 Windsor
1994 Ford F-250 7.3 Powerstroke
2016 Ford F-250 6.7 Powerstroke

VT_Kook
Posts: 7
Joined: Mon Dec 05, 2016 3:21 pm

Re: New Member Senior At Tech...need help!

Post by VT_Kook » Tue Dec 06, 2016 5:45 pm

Wow thanks for the input! I will reach out as soon as everything is set up. The bushings on my 4600 shocks are shot so im pounding those out and putting new ones in, but I should be good after that. Pretty awesome to get a warm welcome thanks.

User avatar
Rex82
Posts: 285
Joined: Thu May 02, 2013 11:14 pm
Location: Bel Air, MD

Re: New Member Senior At Tech...need help!

Post by Rex82 » Wed Dec 07, 2016 12:18 pm

Welcome :beer:
Chris
'04 LJ
'13 HYUNDAI Sonata
Play dirty, leave happy

User avatar
FJCcrawler
Posts: 505
Joined: Fri Aug 30, 2013 7:18 pm

Re: New Member Senior At Tech...need help!

Post by FJCcrawler » Thu Dec 08, 2016 3:14 am

Hey! Welcome!
'01 4Runner -New lower ball joints
'85 4Runner
'04 GX470
’88 Xtra cab
’94 Land Cruiser
Chris

User avatar
NJKURPat
Posts: 171
Joined: Mon Oct 06, 2014 2:37 pm

Re: New Member Senior At Tech...need help!

Post by NJKURPat » Tue Dec 13, 2016 12:55 am

Can confirm, installed my lift in the parking garage

Welcome!
| 2008 JKUR | 4.10 | 3" MC DUALRATE LIFT | UCA's | TRACKBAR | 35" TG | HARDTOP |

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest