Carter YF and YFA carb info

Wrenching and Technical Information

Moderator: Club Officers

Post Reply
User avatar
TerryD
Posts: 1841
Joined: Mon Sep 04, 2006 7:57 pm
Location: Covington, Va

Carter YF and YFA carb info

Post by TerryD » Mon Aug 30, 2021 9:28 pm

Andrew and Grubb got me inside the YFA (I think) on Andrew's Jeep Sunday on the trail. Did some looking and found this with some basic info. Thought I'd start sharing it here as we learn what to do with them.

https://www.garysgaragemahal.com/carter-yfa-1bbl.html

Better info:

https://www.carburetor-blog.com/article ... er-yf-yfa/
Terry
Offroading: The hobby of turning perfectly good vehicles into scrap metal. :cool:

User avatar
VerticalTRX
Honorary Member
Posts: 744
Joined: Wed Oct 26, 2005 12:51 pm
Location: Southwest VA
Contact:

Re: Carter YF and YFA carb info

Post by VerticalTRX » Tue Aug 31, 2021 8:21 am

Good info in those links, I’ll get the numbers off it today but I also think it is a YFA. I did some looking and Comp makes a few cams for the 2.3, smallest being their High Energy 201/201@.050, .400 lift, 110 Lsa, 800-4800 operating range. I think we need to get the carb and ignition sorted first though.
'79 F-150
'97 4runner
'49 CJ-3A

User avatar
TerryD
Posts: 1841
Joined: Mon Sep 04, 2006 7:57 pm
Location: Covington, Va

Re: Carter YF and YFA carb info

Post by TerryD » Tue Aug 31, 2021 8:56 am

The biggest issue I see is how much it spills over when you pitch it up. I think dropping the float a little more might help but you'll need to check and see how close it is to spec. Don't want to get it so low it starts impeding fuel flow.

But I think it helped a lot the other day. Much less smoke and loading up.
Terry
Offroading: The hobby of turning perfectly good vehicles into scrap metal. :cool:

User avatar
Millsonwheels
Posts: 39
Joined: Mon Oct 09, 2017 2:24 pm
Location: Radford Va

Re: Carter YF and YFA carb info

Post by Millsonwheels » Thu Sep 02, 2021 11:14 am

yeah after the fixes when I was behind him I could still smell it a bit but not the noticeable black smoke it was producing
"I flock to beaters" -Benjamin Franklin
1947 Willys Pickup Broken but still reliable
1953 Willys CJ-3B Actively trying to break it
1999 Toyota 4Runner Limited, Daily Driver/Mild wheeling machine
2011 Ford F-250 "Tow Rig flavor of the month"

User avatar
Millsonwheels
Posts: 39
Joined: Mon Oct 09, 2017 2:24 pm
Location: Radford Va

Re: Carter YF and YFA carb info

Post by Millsonwheels » Thu Sep 02, 2021 11:21 am

what I have I was talking about was a holley 1904 1 barrel carb it was used on 144-223 cubic inch inline 6s, supposedly the have very nice off road manners and small size. ill bring it to you if you think it would work on his
1904.jpg
1904.jpg (8.77 KiB) Viewed 231 times
"I flock to beaters" -Benjamin Franklin
1947 Willys Pickup Broken but still reliable
1953 Willys CJ-3B Actively trying to break it
1999 Toyota 4Runner Limited, Daily Driver/Mild wheeling machine
2011 Ford F-250 "Tow Rig flavor of the month"

User avatar
VerticalTRX
Honorary Member
Posts: 744
Joined: Wed Oct 26, 2005 12:51 pm
Location: Southwest VA
Contact:

Re: Carter YF and YFA carb info

Post by VerticalTRX » Sat Sep 04, 2021 6:48 pm

Thats a good looking little carb, if the Carter doesn’t pan out it might be worth a try.

I briefly looked for some numbers on the carb but couldn’t see anything meaningful. After looking again I’m 99% sure its YFA. Andrew will be down Tuesday and we’ll start working on the jeeps then, might drop the float a little more if we get a chance.
'79 F-150
'97 4runner
'49 CJ-3A

User avatar
Millsonwheels
Posts: 39
Joined: Mon Oct 09, 2017 2:24 pm
Location: Radford Va

Re: Carter YF and YFA carb info

Post by Millsonwheels » Wed Sep 15, 2021 3:16 pm

it did run better, I think he would still get the biggest benefit from a cam swap now
"I flock to beaters" -Benjamin Franklin
1947 Willys Pickup Broken but still reliable
1953 Willys CJ-3B Actively trying to break it
1999 Toyota 4Runner Limited, Daily Driver/Mild wheeling machine
2011 Ford F-250 "Tow Rig flavor of the month"

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest