Need advice on slip yoke

Wrenching and Technical Information

Moderator: Club Officers

Post Reply
Posts: 4
Joined: Mon Sep 08, 2014 11:35 pm

Need advice on slip yoke

Post by saab900 » Sat Jun 10, 2017 1:31 pm

Hey all, might be my first post but have been around for a while. Also if I get ny of the lanuage wrong please correct me, much more experienced with fwd than rwd/4wd terminology..

Im putting a T5 into my Bronco 2 (RBV) and the trans I got did not come with a slip yoke for the tail shaft. This T5 (13-52-066-941) has a 27 spline slip yoke (i believe) and uses mechanics 3r ujoints. Now looking online there seems to be plenty of options for a slip yoke that fits this spline but fits 1310 ujoints (what the baby bronco uses). My biggest point of confusion is identifying how long my slip yoke needs to be. This is definitely not a rock crawler, mostly see's pavement and the occasional mud so I don't need massive amounts of travel out of the driveshaft.

Any help or advice would be much appreciated!


Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests